2-54
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug ip dhcp snooping packet
debug ip dhcp snooping packet
To debug DHCP snooping messages, use the debug ip dhcp snooping packet command. To disable
debugging output, use the no form of this command.
debug ip dhcp snooping packet
no debug ip dhcp snooping packet
Syntax Description This command has no arguments or keywords.
Defaults Debugging of snooping packet is disabled.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable debugging for DHCP snooping packets:
Switch# debug ip dhcp snooping packet
Switch#
This example shows how to disable debugging for DHCP snooping packets:
Switch# no debug ip dhcp snooping packet
Switch#
Related Commands debug ip dhcp snooping event
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.
To Next Page
Loading...
Need help?
General
