Cisco 4500M Command Reference

2-499
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
vlan database
vlan database
To enter VLAN configuration mode, use the vlan database command.
vlan database
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines From VLAN configuration mode, you can access the VLAN database editing buffer manipulation
commands, including:
• abort—Exits mode without applying the changes.
• apply—Applies current changes and bumps the revision number.
• exit—Applies changes, bumps the revision number, and exits VLAN configuration mode.
• no—Negates a command or sets its defaults; valid values are vlan and vtp.
• reset—Abandons current changes and rereads the current database.
• show—Displays the database information.
• vlan—Accesses subcommands to add, delete, or modify values that are associated with a single
VLAN. For information about the vlan subcommands, see the vlan (VLAN Database mode)
command.
• vtp—Accesses subcommands to perform VTP administrative functions. For information about the
vtp subcommands, see the vtp client command.
Examples This example shows how to enter VLAN configuration mode:
Switch# vlan database
Switch(vlan)#
This example shows how to exit VLAN configuration mode without applying changes after you are in
VLAN configuration mode:
Switch(vlan)# abort
Aborting....
Switch#
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English