2-435
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
spanning-tree mst max-age
spanning-tree mst max-age
To set the max-age timer for all the instances, use the spanning-tree mst max-age command. To return to
the default settings, use the no form of the command.
spanning-tree mst max-age seconds
no spanning-tree mst max-age
Syntax Description
Defaults The max-age timer is set for 20 seconds.
Command Modes Global configuration
Command History
Examples This example shows how to set the max-age timer:
Switch(config)# spanning-tree mst max-age 40
Switch(config)#
Related Commands show spanning-tree mst
seconds Number of seconds to set the max-age timer for all the instances on the Catalyst4500
series switch; valid values are from 6 to 40 seconds.
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.