Cisco 4500M Command Reference

2-52
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug ipc
debug ipc
To debug IPC activity, use the debug ipc command. To disable debugging output, use the no form of this
command.
debug ipc {all | errors | events | headers | packets | ports | seats}
no debug ipc {all | errors | events | headers | packets | ports | seats}
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable debugging of IPC events:
Switch# debug ipc events
Special Events debugging is on
Switch#
Related Commands undebug ipc (same as no debug ipc)
all Enables all IPC debugging.
errors Enables IPC error debugging.
events Enables IPC event debugging.
headers Enables IPC header debugging.
packets Enables IPC packet debugging.
ports Enables debugging of the creation and deletion of ports.
seats Enables debugging of the creation and deletion of nodes.
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English