Cisco 4500M Command Reference

2-405
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show vlan private-vlan
show vlan private-vlan
To display PVLAN information, use the show vlan private-vlan command.
show vlan private-vlan [type]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines In the show vlan private-vlan type command output when normal is displayed as a type, a regular
VLAN has been configured in a PVLAN. When normal is displayed, two VLANs have been associated
before type was set and the PVLAN is not operational. This information is useful for debugging
purposes.
Examples This example shows how to display all currently configured PVLAN information:
Switch# show vlan private-vlan
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
100 101 isolated
150 151 non-operational
401 402 non-operational
Switch#
This example shows how to display all currently configured PVLAN type information:
Switch# show vlan private-vlan type
Vlan Type
---- -----------------
202 primary
308 normal
440 isolated
Switch#
Table2-20 describes the fields in the show vlan private-vlan command output.
type (Optional) Displays the PVLAN type; valid types are Isolated and Primary.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English