Cisco 4500M Command Reference

2-188
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
pagp learn-method
pagp learn-method
To learn the input interface of incoming packets, use the pagp learn-method command. To return to the
default value, use the no form of this command.
pagp learn-method {aggregation-port | physical-port}
no pagp learn-method
Syntax Description
Defaults Aggregation port is enabled.
Command Modes Interface configuration
Command History
Examples This example shows how to enable port channel address learning:
Switch(config-if)# pagp learn-method
Switch(config-if)#
This example shows how to enable physical port address learning within the bundle:
Switch(config-if)# pagp learn-method physical-port
Switch(config-if)#
This example shows how to enable aggregation port address learning within the bundle:
Switch(config-if)# pagp learn-method aggregation-port
Switch(config-if)#
Related Commands pagp learn-method
show pagp
aggregation-port Specifies learning the address on the port channel.
physical-port Specifies learning the address on the physical port within the bundle.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English