Cisco 4500M Command Reference

2-512
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
vtp password
vtp password
To create a VTP domain password, use the vtp password command. To delete the password, use the no
form of this command.
vtp password password-value
no vtp password
Syntax Description
Defaults Disabled
Command Modes VLAN configuration
Command History
Examples This example shows how to create a VTP domain password:
Switch(vlan-config)# vtp password DomainChandon
Switch(vlan-config)#
This example shows how to delete the VTP domain password:
Switch(vlan-config)# no vtp password
Clearing device VLAN database password.
Switch(vlan-config)#
Related Commands show vtp
vtp (global configuration mode)
password-value An ASCII string, from 1 to 32 characters, identifying the administrative domain for
the device.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English