Cisco 4500M Command Reference

2-2
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
#macro keywords
#macro keywords
To specify the help string for macro keywords, use the #macro keywords command.
#macro keywords [keyword1] [keyword2] [keyword3]
Syntax Description
Defaults This command has no default settings.
Command Modes Global configuration
Command History
Usage Guidelines If you do not specify the mandatory keywords for a macro, the macro is to be considered invalid and fails
when you attempt to apply it. By entering #macro keywords, you will receive a message indicating what
you need to include to make the syntax valid.
Examples This example shows how to specify the help string for keywords associated with a macro named test:
Switch(config)# macro name test
macro name test
Enter macro commands one per line. End with the character '@'.
#macro keywords $VLAN $MAX
swichport
@
Switch(config)# int gi1/1
Switch(config-if)# macro apply test ?
WORD Keyword to replace with a value e.g $VLAN, $MAX << It is shown as help
<cr>
Related Commands macro apply cisco-desktop
macro apply cisco-phone
macro apply cisco-router
macro apply cisco-switch
keyword 1 (Optional) Specifies a keyword that is needed while applying a macro to an
interface.
keyword 2 (Optional) Specifies a keyword that is needed while applying a macro to an
interface.
keyword 3 (Optional) Specifies a keyword that is needed while applying a macro to an
interface.
Release Modification
12.2(18)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English