Cisco 4500M Command Reference

2-513
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
vtp pruning
vtp pruning
To enable pruning in the VLAN database, use the vtp pruning command. To disable pruning in the
VLAN database, use the no form of this command.
vtp pruning
no vtp pruning
Syntax Description This command has no arguments or keywords.
Defaults Disabled
Command Modes VLAN configuration
Command History
Usage Guidelines VTP pruning causes information about each pruning-eligible VLAN to be removed from VTP updates
if there are no stations belonging to that VLAN.
Examples This example shows how to enable pruning in the VLAN database:
Switch(vlan-config)# vtp pruning
Pruning switched ON
Switch(vlan-config)#
This example shows how to disable pruning in the VLAN database:
Switch(vlan-config)# no vtp pruning
Pruning switched OFF
Switch(vlan-config)#
Related Commands show vtp
vtp (global configuration mode)
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English