Cisco 4500M Command Reference

2-456
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
storm-control broadcast include multicast
storm-control broadcast include multicast
To enable multicast storm control on a port, use the storm-control broadcast include multicast
command. Use the no form of this command to disable multicast storm control.
storm-control broadcast include multicast
no storm-control broadcast include multicast
Syntax Description This command has no arguments or keywords.
Defaults Multicast storm control is disabled.
Command Modes Global configuration
Command History
Usage Guidelines This command prompts the hardware to filter multicast packets if it is already filtering broadcast packets.
Examples This example shows how to enable multicast storm control globally:
Switch(config)# storm-control broadcast include multicast
Switch(config)#
Related Commands storm-control
Release Modification
12.2(18)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English