Cisco 4500M Command Reference

2-506
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
vmps retry
vmps retry
To configure the per-server retry count for the VLAN Query Protocol (VQP) client, use the vmps retry
command. To return to the default setting, use the no form of this command.
vmps retry count
no vmps retry
Syntax Description
Defaults The retry count is 3.
Command Modes Global configuration
Command History
Usage Guidelines You can verify your setting by entering the show vmps command and examining information in the
Server Retry Count row.
Examples This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
Related Commands show vmps
count Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list; valid values are from 1 to 10.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English