2-504
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
vmps reconfirm (global configuration)
vmps reconfirm (global configuration)
To change the reconfirmation interval for the VLAN Query Protocol (VQP) client, use the vmps
reconfirm command. To return to the default setting, use the no form of this command.
vmps reconfirm interval
no vmps reconfirm
Syntax Description
Defaults The reconfirmation interval is 60 minutes.
Command Modes Global configuration
Command History
Examples This example shows how to set the VQP client to reconfirm dynamic VLAN entries every 20 minutes:
Switch(config)# vmps reconfirm 20
Switch(config)#
You can verify your setting by entering the show vmps command and examining information in the
Reconfirm Interval row.
Related Commands show vmps
vmps reconfirm (privileged EXEC)
interval Queries to the VLAN Membership Policy Server (VMPS) to reconfirm dynamic
VLAN assignments; valid values are from 1 to 120 minutes.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.
To Next Page
Loading...
Need help?
General
