2-32
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip igmp snooping membership
clear ip igmp snooping membership
To clear the explicit host tracking database, use the clear ip igmp snooping membership command.
clear ip igmp snooping membership [vlan vlan_id]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines By default, the explicit host tracking database maintains a maximum of 1 KB entries. After you reach
this limit, no additional entries can be created in the database. To create more entries, you will need to
delete the database with the clear ip igmp snooping statistics vlan command.
Examples This example shows how to display IGMP snooping statistics for VLAN 25:
Switch# clear ip igmp snooping membership vlan 25
Switch#
Related Commands ip igmp snooping vlan explicit-tracking
show ip igmp snooping membership
vlan vlan_id (Optional) Specifies a VLAN; valid values are from 1 to 1001 and from 1006 to 4094.
Release Modification
12.1(20)EW Support for this command was introduced on the Catalyst 4500 series switch.
To Next Page
Loading...
Need help?
General
