Cisco 4500M Command Reference

2-342
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show mac-address-table interface
show mac-address-table interface
To display the MAC address table information for a specific interface, use the show mac-address-table
interface command.
show mac-address-table interface type slot/port
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines For MAC address table entries used by routed ports, the routed port name is displayed in the “vlan”
column rather than the internal VLAN number.
Examples This example shows how to display MAC address table information for a specific interface:
Switch# show mac-address-table interface fa6/16
Unicast Entries
vlan mac address type protocols port
-------+---------------+--------+---------------------+--------------------
2 0000.0000.0101 dynamic other FastEthernet6/16
2 0000.0000.0102 dynamic other FastEthernet6/16
2 0000.0000.0103 dynamic other FastEthernet6/16
2 0000.0000.0104 dynamic other FastEthernet6/16
2 0000.0000.0105 dynamic other FastEthernet6/16
2 0000.0000.0106 dynamic other FastEthernet6/16
Multicast Entries
vlan mac address type ports
-------+---------------+-------+-------------------------------------------
2 ffff.ffff.ffff system Fa6/16
Switch#
type Interface type; valid values are Ethernet, FastEthernet, and GigabitEthernet.
slot/port Number of the slot and port.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English