Cisco 4500M Command Reference

2-209
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
qos (interface configuration mode)
qos (interface configuration mode)
To enable QoS functionality on an interface, use the qos command. To disable QoS functionality on an
interface, use the no form of this command.
qos
no qos
Syntax Description This command has no arguments or keywords.
Defaults QoS is enabled.
Command Modes Interface configuration
Command History
Usage Guidelines If QoS functionality is globally disabled, it is also disabled on all interfaces.
Examples This example shows how to enable QoS functionality on an interface:
Switch(config-if)# qos
Switch(config-if)#
Related Commands show qos
qos (global configuration mode)
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English