Cisco 4500M Command Reference

2-236
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
session module
session module
To remotely connect to a specific module, use the session module configuration command.
session module mod
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged
Command History
Usage Guidelines This command applies only to the Access Gateway Module on Catalyst 4500 series switches.
The valid values for mod depends on the chassis used. For example, if you have a Catalyst 4006 chassis,
valid values for the module are from 2 to 6. If you have a 4507R chassis, valid values are from 3 to 7.
When you execute the session module mod command, the prompt changes to Gateway#.
The session command is identical to the attach module mod and the remote login module mod
commands.
Examples This example shows how to remotely log in to the Access Gateway Module:
Switch# session module 5
Attaching console to module 5
Type 'exit' at the remote prompt to end the session
Gateway>
Related Commands attach module
remote login module
mod Target module for the command.
Release Modification
12.1(19)EW This command was first introduced.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English