Cisco 4500M Command Reference

2-401
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show vlan counters
show vlan counters
To display software-cached counter values, use the show vlan counters command.
show vlan [id vlanid] counters
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines If you enter the show vlan counters command without specifying the VLAN ID, software-cached
counter values for all VLANs are displayed.
Examples This example shows how to display the software-cached counter values for a specific VLAN:
Switch> show vlan counters
* Multicast counters include broadcast packets
Vlan Id : 1
L2 Unicast Packets : 0
L2 Unicast Octets : 0
L3 Input Unicast Packets : 0
L3 Input Unicast Octets : 0
L3 Output Unicast Packets : 0
L3 Output Unicast Octets : 0
L3 Output Multicast Packets : 0
L3 Output Multicast Octets : 0
L3 Input Multicast Packets : 0
L3 Input Multicast Octets : 0
L2 Multicast Packets : 1
L2 Multicast Octets : 94
Switch>
Related Commands clear vlan counters
id vlanid (Optional) Displays the software-cached counter values for a specific VLAN.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst4500 series switches.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English