Cisco 4500M Command Reference

2-218
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
qos dscp
qos dscp
To define the default CoS value for an interface, use the qos dscp command. To remove a prior entry,
use the no form of this command.
qos dscp dscp_value
no qos dscp dscp_value
Syntax Description
Defaults The default DSCP value is 0.
Command Modes Interface configuration
Command History
Examples This example shows how to configure the default QoS DSCP value as 6:
Switch(config-if)# qos dscp 6
Switch(config-if)#
Related Commands show qos interface
dscp_value Default DSCP value for the interface; valid values are from 0to63.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English