2-40
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear vlan counters
clear vlan counters
To clear the software-cached counter values to start from zero again for a specified VLAN or all existing
VLANs, use the clear vlan counters command.
clear vlan [vlan-id] counters
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify a vlan-id value; the software-cached counter values for all existing VLANs are
cleared.
Examples This example shows how to clear the software-cached counter values for a specific VLAN:
Switch# clear vlan 10 counters
Clear "show vlan" counters on this vlan [confirm]y
Switch#
Related Commands show vlan counters
vlan-id (Optional) VLAN number; see “Usage Guidelines” for valid values.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst4500 series switches.
To Next Page
Loading...
Need help?
General
