Garmin G300 User Manual

Garmin G300 Pilot’s Guide
190-00921-00 Rev. D 93
GPS Navigation
System
Overview
Flight
Instruments EIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features
Integrated
Autopilot Annun/Alerts Appendix Index
If duplicate entries exist for the entered facility name or location, additional
entries may be viewed by continuing to turn the FMS Joystick during the selection
process. If duplicate entries exist for an identifier, a Duplicate Waypoints Window
is displayed. Press the ENT Key to move the cursor to the Duplicate Waypoints
Window.
Waypoint Information Window-Duplicate Identifier
Duplicate Waypoints Window
Selecting a runway:
1) With the Waypoint (WPT) Page displayed, press the INFO Softkey.
2) Press the FMS Joystick to activate the cursor.
3) Turn the FMS Joystick clockwise to begin entering a waypoint identifier
for the desired runway (turning it counter-clockwise brings up the
waypoint selection submenu - press the CLR Key or the FMS Joystick
to remove it), or move the FMS Joystick to select the facility name, or
city field.
4) Press the ENT Key. Dual Display: continue to Step 7.
5) Press the RUNWAY Softkey (Single Display only).
6) Press the FMS Joystick to activate the cursor (Single Display only).
7) Move the FMS Joystick to place the cursor in the ‘Runway’ Box, on the
runway designator.

Garmin G300 Specifications

General

Brand	Garmin
Model	G300
Category	GPS
Language	English