Garmin G300 Pilot’s Guide
190-00921-00 Rev. D 201
Integrated Autopilot
System
Overview
Flight
Instruments EIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features
Integrated
Autopilot Annun/Alerts Appendix Index
CHANGING THE SELECTED COURSE (OBS MODE)
Enabling/disabling OBS Mode and changing the selected
course:
1)
From the PFD Page (single display), PFD (dual display), or the MAP
Page on the MFD (dual display), press the MENU Key while navigating
a flight plan or Direct-to.
2)
With ‘Set OBS and Hold’ highlighted, press the ENT Key. The OBS
Mode Box is highlighted. In OBS Mode the subdued CRS Softkey
becomes the OBS Softkey (PFD and PFD Page).
3)
Turn the FMS Joystick to select the desired course to/from the
waypoint.
4)
To cancel OBS Mode and return to automatic waypoint sequencing,
press the MENU Key, with ‘Release Hold’ highlighted, press the ENT
Key. The OBS Softkey returns to the subdued CRS Softkey (PFD and
PFD Page).
Holding the CWS Button and hand-flying the aircraft does not change
the Selected Course while in Navigation Mode. The Integrated Autopilot
guides the aircraft back to the flight plan course when the CWS Button
is released.
9.4 INTEGRATED AUTOPILOT ALERTS
Refer to Section 10.4, ‘PFD Annunciations and Alerting Functions’.
To Next Page
Loading...
Need help?
General
