Garmin G300 Pilot’s Guide
190-00921-00 Rev. D
130
Flight Planning
System
Overview
Flight
InstrumentsEIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features
Integrated
AutopilotAnnun/AlertsAppendixIndex
Vectors-to-Final (Map Page)
(Single Display)
Final Course
Extension
The G300 does not provide guidance to the inbound course. The course
deviation needle on the graphic HSI remains off-center until established on the
final approach course. The map shows an extension of the final approach course
using a bold magenta line.
If the VECTORS Softkey is not pressed, the G300 creates a straight-line course
directly to the first waypoint in the approach.
Loading the approach cancels the Direct-to and initiates a route to the FAF.
Cancelling Vectors-to-Final:
From the Active Flight Plan Page (with an approach activated), press
the VECTORS Softkey.
Or
:
1)
From the Active Flight Plan Page, press the MENU Key.
2)
Turn or move the FMS Joystick to highlight ‘Cancel Vectors-to-Final’
and press the ENT Key.
6.7 TRIP PLANNING
Refer to Appendix B (Utilities) for information on Flight Log and Track Log.
To Next Page
Loading...
Need help?
General
