Garmin G300 - Safetaxi Cycle Number and Revision

Garmin G300 Pilot’s Guide
190-00921-00 Rev. D 165
Additional Features
System
Overview
Flight
Instruments EIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features
Integrated
Autopilot Annun/Alerts Appendix Index
Enabling/disabling SafeTaxi:
1) With the Map Page displayed, press the Menu Key. The Map Page
Menu is displayed.
2) Turn or move the FMS Joystick to highlight ‘Set Up Map’ and press the
ENT Key.
3) Turn the FMS Joystick to highlight the ‘Airport’ Category from the
horizontal list.
4) Move the FMS Joystick to highlight the ‘Safe Taxi’ Field.
5) Turn the FMS Joystick to access the menu options.
6) Turn or move the FMS Joystick to select ‘On’ or ‘Off’, and press the
ENT Key.
SAFETAXI CYCLE NUMBER AND REVISION
SafeTaxi database is revised every 56 days. SafeTaxi is always available for use
after the expiration date. The Power-up Page indicates whether the databases
are current, out of date, or not available. The Power-up Page shows the SafeTaxi
database is current when the SafeTaxi Expires date is shown in white. When the
SafeTaxi cycle has expired, the SafeTaxi Expires date appears in yellow.
The SafeTaxi Region, Version, Cycle, Effective date, and Expiration date
of the database cycle can also be found in the Main Menu, under ‘Database
Information’.
The SafeTaxi database is provided by Garmin. Refer to Appendix C for instructions
on updating the SafeTaxi database.