Garmin G300 Pilot’s Guide
190-00921-00 Rev. D 61
Flight Instruments
System
Overview
Flight
Instruments EIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features
Integrated
Autopilot Annun/Alerts Appendix Index
Syncing to the current aircraft location:
1)
With OBS Mode enabled, press the OBS Softkey (if necessary).
2)
Press and hold the FMS Joystick. The course is now synced to the
current aircraft track.
2.2 SUPPLEMENTAL FLIGHT DATA
In addition to the flight instruments, the PFD or PFD Page also displays various
supplemental information, including the Outside Air Temperature (OAT), wind
data, and Vertical Navigation (VNAV) indications.
OUTSIDE AIR TEMPERATURE
The Outside Air Temperature (OAT) is displayed in degrees Fahrenheit (°F) in the
lower left of the PFD or PFD Page.
Outside Air Temperature (PFD Page - Single Display)
Outside Air Temperature
WIND DATA
Wind direction and speed (relative to the aircraft) in knots can be displayed in a
window to the upper left of the HSI. When the window is selected for display, but
wind information is invalid or unavailable, the window displays “No Wind Data”.
Displaying/removing wind data:
1)
From the PFD (dual display) or PFD Page (single display), press the
MENU Key.
2)
With the ‘Set Up PFD’ menu option highlighted, press the ENT Key.
Skip to step 3 if at least one external navigator is configured.
3)
Move the FMS Joystick to highlight the Wind Vector field.
4)
Turn the FMS Joystick to highlight ‘On’ or ‘Off’.
To Next Page
Loading...
Need help?
General
