Garmin G300 Pilot’s Guide
190-00921-00 Rev. D
Appendix C
232
System
Overview
Flight
InstrumentsEIS
COM
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features
Integrated
AutopilotAnnun/AlertsAppendixIndex
Installing an SD Card:
1)
Insert the card into the slot on the top, right, front of the bezel. Be
sure the SD Card contacts are facing the display.
2)
Firmly push the card into the unit. It is not necessary to force the card.
3)
The unit takes a few seconds to read the card. When the data card
has been properly installed and accepted, a summary screen noting the
card details appears. Press ENT Key to acknowledge.
If you insert an SD Card and get a card format not recognized message, try
removing the card and reinserting it. If the card is still not recognized, contact
Garmin Product Support or your Garmin dealer.
Removing an SD Card:
1)
Push the card into the unit until it stops.
2)
Release the card. The card should eject for easy removal.
3)
With the card ejected, pull the card out of the slot.
G300 DATABASES
The following databases are included with the G300 depending on the unit
(Americas, Atlantic, or Pacific). See the Additional Feature section for information
on AOPA Airport Directory, FliteCharts
®
, and SafeTaxi
®
. See the Hazard Avoidance
section for information on Obstacles and Terrain.
Database
G300
Basemap +
AOPA Airport Directory +
Jeppesen
®
Navigation Database (NavData
™
)
+
FliteCharts
®
+
SafeTaxi
®
+
Obstacle +
Terrain +
Databases
To Next Page
Loading...
Need help?
General
