GE LOGIQ P6 Pro Series User Manual

GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 4 - Page 4-47
4-9-7 SOM Function Validation Procedure
1.) Turn on the system.
2.) Press the 'del' key in A/N key within 3 sec. to enter BIOS setting mode.
3.) Set the system time and the system Date.
4.) Check the SOM version (HW version & BIOS version)
5.) Press the 'F10' key to save configuration changes and exit bios mode. The system will restart.
6.) Check the basic function of system's different modes. Refer to the 4-3-4 "System B/M-Mode
Checks" on page 4-7 and refer to the 4-3-5 "System CFM and PWD Checks" on page 4-8.
4-9-8 RFC Assy Function Validation Procedure
1.) Turn on the system
2.) Check the basic function of system's different modes.
Refer to the 4-3-4 "System B/M-Mode Checks" on page 4-7 and refer to the 10-5-2-1 "System Checks"
on page 10-8.
Figure 4-46 Check the SOM version (HW version & BIOS version)
3.)
4.) BIOS version
4.)HW version

GE LOGIQ P6 Pro Series Specifications

General

Brand	GE
Model	LOGIQ P6 Pro Series
Category	Medical Equipment
Language	English