GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 1 - Page 1-1
Chapter 1
Introduction
Section 1-1
Overview
1-1-1 Purpose of Chapter 1
This chapter describes important issues related to safely servicing the LOGIQ™ P6/P6 Pro scanner.
The service provider must read and understand all the information presented in this manual before
installing or servicing a unit.
1-1-2 Purpose of Service Manual
This Service Manual provides installation and service information for the LOGIQ™ P6/P6 Pro
Ultrasound Scanning System and contains the following chapters:
1.) Chapter 1 - Introduction : Contains a content summary and warnings.
2.) Chapter 2 - Pre-Installation: Contains pre-installation requirements for the LOGIQ™ P6/P6 Pro.
3.) Chapter 3 - Installation: Contains installation procedures.
4.) Chapter 4 - Functional Checks: Contains functional checks that are recommended as part of the
installation, or as required during servicing and periodic maintenance.
5.) Chapter 5 - Components and Functions (Theory) : Contains block diagrams and functional
explanations of the electronics.
6.) Chapter 6 - Service Adjustments : Contains instructions on how to make available adjustments
to the LOGIQ™ P6/P6 Pro.
7.) Chapter 7 - Diagnostics/Troubleshooting : Provides procedures for running diagnostic or related
routines for the LOGIQ™ P6/P6 Pro.
8.) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly
procedures for all changeable Field Replaceable Units (FRU).
9.) Chapter 9 - Renewal Parts: Contains a complete list of field replaceable parts for the LOGIQ™ P6/
P6 Pro.
10.)Chapter 10 - Periodic Maintenance: Provides periodic maintenance procedures for the LOGIQ™
P6/P6 Pro.
Table 1-1 Contents in Chapter 1
Section Description Page Number
1-1
Overview
1-1
1-2
Important Conventions
1-3
1-3
Safety Considerations
1-12
1-4
EMC, EMI, and ESD
1-17
1-5
Customer Assistance
1-18
To Next Page
Loading...
Need help?
General
