Kubota WSM L5040-II User Manual

HYDRAULIC SYSTEM
L3540-II, L4240-II, L5040-II, L5240-II, L5740-II , WSM
8-S25
(2) Disassembling Front Loader Control Valve and Relief Valve
 Boom Control Section and Bucket Control Section
1. Remove the plug (8) and remove the spring (10) and load check valve (11).
2. Remove the plug (24) from valve body (14).
3. Remove the internal snap ring (30), and remove the stopper (27), detent spring (25), detent ring (26), and ball
(28).
4. Draw out the spool (15), (16) with other component parts from valve body (14).
 Relief Valve
1. Remove the plug (1) and remove the spring (5) and poppet (6), (7).
9Y1211167HYS0034US0
(1) Plug
(2) O-ring
(3) Washer
(4) Shim
(5) Spring
(6) Poppet 2
(7) Poppet 1
(8) Plug
(9) O-ring
(10) Spring
(11) Check Valve
(12) Dust Seal
(13) O-ring
(14) Valve Body
(15) Spool for Boom
(16) Spool for Bucket
(17) O-ring
(18) Backup Ring
(19) Collar
(20) Spring Holder 1
(21) Spring
(22) Spring Holder 2
(23) Detent Bolt 1
(24) Plug
(25) Detent Spring
(26) Detent Ring
(27) Stopper
(28) Ball
(29) Plate
(30) Internal Snap Ring
KiSC issued 02, 2015 A

Kubota WSM L5040-II Specifications

General

Brand	Kubota
Model	WSM L5040-II
Category	Tractor
Language	English