When a Job Is Not Performed
13
1
When a Job Is Not Performed
If you are not able to carry out your job, it may be that the machine is being used
by another function.
Wait until the current job is completed before trying again. In certain cases, you
can carry out another job using a different function while the current job is being
performed. Performing multiple functions simultaneously like this is called
“Multi-accessing”.
Combination Chart
❖ Function Compatibility
The chart shows Function Compatibility when print priority is set to “Inter-
leave”. See “Print Priority”, General Settings Guide.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and re-
mote switching (of the scanner/external extension) is done.
: Operation is enabled when the {Interrupt} key is pressed to interrupt the
preceding operation.
→ : Operation is performed automatically once the preceding operation ends.
× : The operation must be started once the preceding operation ends. (Simul-
taneous operations are not possible.)
Function you want to se-
lect
Copier
Interrupt Copying
Facsimile Printer
Scanner
TWAIN
Document Server
DeskTopBinder
Web Document Server
Function in progress
Transmission Operation/Manual Reception Operation
Transmission
Reception
Data Reception
Print
Operations for Copying
Stapling
Sort
Operations for Copying
Copying
Scanning an Original for Memory Transmission
Memory Transmission
Immediate Transmission
Memory Reception
Printing Received Data
Printing
Stapling
Operations for Scanning
Scanning
Scanning
Operations for Document Server
Scanning a Document to Store in Document Server
Printing from Document Server
Printing from Document Server
Sending a Facsimile from Document Server
Printing
Copier
Operations for
Copying
×××
Stapling
*1
→
*1
→
*1
*5
*2
*2
→
*2
×
*2
*4
*4
*4
Sort
*1
→
*1
→
*1
*2
*2
*2
×
*2
Interrupt
Copying
Operations for
Copying
×××× × ×××
Copying
×××× × → →→ ×××→ →
To Next Page
Loading...
Need help?
General
