Printing Options
167
3
Page Reduction
If you receive a document that is longer than the paper in the tray, the machine
usually prints it on two pages. If you turn this function on, the machine reduces
the width and length of the received image so that it will fit on one page.
If A4L paper is loaded and a document of B4 JISL size is received, the machine
will reduce the document to a single A4L sheet.
Note
❒ You can turn this function on or off with the User Parameters (switch 10, bit 3)
in the Facsimile Features menu.
❒ When this function is used, the printing quality may not be as good as usual.
Reference
p.166 “Page Separation and Length Reduction”
“Facsimile Features”, General Settings Guide
TSI Print (Transmitting Subscriber Identification Print)
Usually the sender's Fax Header is printed on received documents. When you
receive an Internet Fax document, the e-mail address of the sender is printed. If
the sender has not programmed their Fax Header, you will not be able to iden-
tify them. However, if you turn this function on, the sender's Own Name or Own
Fax Number is printed instead so you can find out where the document came
from.
Note
❒ You can turn this function on or off in the User Parameters (switch 02, bit 3)
in the Facsimile Features menu.
Reference
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
