Troubleshooting When Using the Scanner Function
74
5
When You Cannot Send Scanned Files
The following sections explain likely causes of and solutions for Network Deliv-
ery and E-mail Sending-related problems.
When Stored Files Cannot Be Accessed
This section describes likely causes of and possible solutions for job access-relat-
ed problems.
When You Cannot Browse the Network to Send a Scan file
This section describes likely causes of and possible solutions for the Browser
Network failing to operate when files are sent.
When the TWAIN Driver Cannot Be Started
This section describes likely causes of and possible solutions for the TWAIN
driver failing to operate.
Problem Cause Solution
The stored file is locked
and is not accessible.
The file, which is password pro-
tected, is locked because the pass-
word was incorrectly entered ten
times.
Contact the administrator.
Problem Cause Solution
The network cannot be
browsed when specify-
ing the destination fold-
er.
The following machine settings
may not be correct:
• IPv4 address
• Subnet Mask
Check the settings. See “Network
Settings”, General Settings
Guide.
Problem Cause Solution
The Scanner Properties
dialog box cannot be
displayed.
Advanced encryption has been
specified in the extended security
setting.
For details about the extended se-
curity setting, contact an admin-
istrator.
To Next Page
Loading...
Need help?
General
