Document Server
168
4
Note
❒ In step
C
, pressing [Backspace] allows you to delete up to any desired location.
❒ You can enter up to 20 characters for a document name. In the list, however,
up to 16 characters are displayed as the document name. If above limits are
exceeded, the list will display up to 15 characters for the document name.
Setting or changing a password
The following describes the procedure for setting or changing a password to be
attached to a stored document.
A Display the original scan screen.
B Press [Password].
C Enter the password using the number keys and then press [OK].
You can use four to eight digits for specifying the password.
D Enter the password again and then press [OK].
To Next Page
Loading...
Need help?
General
