Specifications for the Main Unit
53
3
Specifications for the Main Unit
❖ Configuration:
Console
❖ Photosensitivity type:
OPC drum
❖ Original scanning:
CCD-CIS
❖ Copy process:
Dry electrostatic transfer system
❖ Development:
Dry two-component magnetic brush development system
❖ Fusing:
Heating roll pressure system
❖ Resolution:
• Scanning original: 600 dpi
• Printing: 1200 dpi
❖ Exposure glass:
Stationary original exposure type
❖ Original reference position:
Rear left corner
❖ Warm-up time: (Type 1, 2)
30 seconds or less (20°C, 68°F)
❖ Warm-up time: (Type 3)
60 seconds or less (20°C, 68°F)
❖ Originals:
Sheet/book/objects
❖ Maximum original size:
A3L, 11" × 17"L, Long length: 1260 mm
❖ Minimum original size:
B6 JIS, 5
1
/
2
" × 8
1
/
2
" (when using the ADF)
To Next Page
Loading...
Need help?
General
