Transmission Modes
17
1
❖ When sending to an Internet Fax destination
Press [Internet Fax] to switch the type of transmission to Internet Fax.
Reference
p.27 “IP-Fax Functions”
p.31 “Internet Fax Functions”
Memory Transmission
Memory transmission mode has standard fax, Internet Fax and IP-Fax.
Important
❒ If there is a power failure (the main power switch is turned off) or the machine
is unplugged for about one hour, all the documents stored in memory are de-
leted. As soon as the main power switch is turned on, the Power Failure Re-
port is printed to help you identify deleted files. Simply turning off the power
by pressing the operation switch does not delete stored documents. See
“Troubleshooting When Using the Facsimile Function”, Troubleshooting.
❒ If memory is full (0% appears in “Memory” at the upper right of the screen),
Memory Transmission is disabled. Use Immediate Transmission instead.
A Make sure [Immed. TX] is not highlighted.
Normally Memory Transmission mode is selected.
B Place the original.
To Next Page
Loading...
Need help?
General
