Adding Paper, Toner and Staples
90
6
Loading Paper into the Large Capacity Tray (LCT)
The following procedure describes loading paper into the large capacity tray
(LCT).
Important
❒ The LCT loads A4K, B5K, 8
1
/
2
× 11K paper.
❒ Align the paper neatly and press its edge to the right and left plate. Poorly
loaded paper causes misfeeds.
❒ Check that the paper edges are aligned at the left side.
❒ Do not stack paper over the limit mark.
A Open the top cover of the large capacity tray (LCT).
B Load the paper in the tray along the edge on the left.
ANS031S
ANS032S
To Next Page
Loading...
Need help?
General
