Control Panel
21
1
Control Panel
This section introduces the names and functions of the components on the con-
trol panel.
This illustration shows the control panel of the machine with options fully in-
stalled.
1. Screen contrast knob
Adjusts the brightness of the display panel.
2. {User Tools/Counter} key
•User Tools
Press to change the default settings
and conditions to meet your require-
ments. See “Accessing User Tools
(System Settings)”, General Settings
Guide.
•Counter
Press to check or print the total num-
ber of copies made. See “Counter”,
General Settings Guide.
•Enquiry
Press to check where to contact for
machine repairs and ordering toner.
See “Enquiry”, General Settings
Guide.
3. Function keys
Press to display the operation screen of
one of the following functions:
•Copy
• Document Server
•Printer
• Scanner
• Facsimile
The indicator of the selected function
goes on. See “Changing Modes”.
4. Display panel
Shows the operation status, error mes-
sages, and function menus.
5. {Clear Modes} key
Press to clear previously entered copy job
settings.
6. {Program} key (copier and scanner
mode)
Press to register frequently used settings,
or to recall registered settings.
7. {Interrupt} key
Press to make interrupt copies during a
copy run. See “Interrupt Copy”, Copy/
Document Server Reference.
8. {Energy Saver} key
Press to shift to and from Low Power
mode. See “Saving Energy”.
9. Main power indicator
The main power indicator lights up when
the main power switch is turned on.
Do not turn off the power while the On
indicator is blinking. Doing so may dam-
age the hard disk.
BFN040S
To Next Page
Loading...
Need help?
General
