Copier Functions
51
2
Selecting the ratio with [o] and [n]
Select a ratio using [o] or [n].
A Press [Reduce / Enlarge].
B Select a preset ratio which is close to the desired ratio.
C Specify the ratio using [o] or [n].
Pressing [o] or [n] changes the ratio in increments of 1%. Pressing and hold-
ing down the relevant key changes the ratio in increments of 10%.
D Press [OK].
E Place the originals, and then press the {Start} key.
Note
❒ If you have incorrectly entered the ratio in step
C
, readjust it with [o] or
[n].
Entering the ratio with the number keys
Enter a ratio using the number keys.
A Press [Reduce / Enlarge].
B Press [Number keys].
C Enter the desired ratio with the number keys, and then press the {q} key.
To Next Page
Loading...
Need help?
General
