Copying
54
2
Size Magnification
You can calculate an enlargement or reduction ratio based on the lengths of the
original and copy.
Measure and specify the lengths of the original and copy by comparing “A” with
“a”.
A Press [Reduce / Enlarge].
B Press [Size Magnification].
C Enter the length of the original with the number keys, and then press the
{q} key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
D Enter the length of the copy with the number keys, and then press the {q}
key.
E Press [OK] twice.
F Place the originals, and then press the {Start} key.
Note
❒ To change the length after pressing the {q} key in step
D
, select [Original]
or [Copy], and then enter the desired length.
ANP059S
To Next Page
Loading...
Need help?
General
