Copying
90
2
Mix 1 & 2 Sided
You can copy two types of originals, one-sided and two-sided, onto one or both
sides of a sheet.
A Press [Dup./Combine/Series].
B Press [Mix 1&2 Sid.].
C Select [1 Sided] or [2 Sided] for the original.
If you select [2 Sided], you can select the orientation.
D Select [1 Sided] or [2 Sided] for the copy.
E Place the originals, and then press the {Start} key.
F If you specify [2 Sided] for either the originals or copies, press [Change Set-
ting] if the number of originals that you want to scan is odd, or if you want
to change the settings for the next originals.
Place the next originals, and then repeat steps
C
to
E
.
Note
❒ When placing originals on the exposure glass or in the ADF using the
Batch function, press the {q} key after all the originals have been scanned.
❒ When making two or more copies with the ADF, specify Batch mode. For
details about Batch mode, see “Batch Mode”.
GCKONZ0J
To Next Page
Loading...
Need help?
General
