Placing Originals
21
1
Mixed Sizes Mode
In Mixed Sizes mode, you can place originals of various sizes in the ADF at the
same time if their widths are the same.
Important
❒ When placing originals of different sizes in the ADF and making copies with-
out using the Mixed Sizes mode, paper might become jammed or parts of the
original image might not be copied.
❒ The sizes of the originals that can be placed in this mode are follows:
•Metric version
A3L and A4K, B4 JISL and B5 JISK, A4L and A5K
•Inch version
11" × 17"L and 8
1
/
2
" × 11"K, 8
1
/
2
" × 11"L and 5
1
/
2
" × 8
1
/
2
"K
❒ You can place originals of two different sizes in the ADF at the same time.
A Press [Special Original].
B Select [Mixed Sizes], and then press [OK].
C Align the rear and left edges of the originals as shown in the illustration.
A Place the originals into the ADF
B Vertical size
D Adjust the guide to the original size.
E Place originals in ADF.
F Press the {Start} key.
ANP073S
To Next Page
Loading...
Need help?
General
