Guide to Components
19
1
Options
This section introduces the names and functions of main optional parts.
External Options
This section provides explanations about external options.
1. Output Jogger
Attached to 3,000Sheet-100Sheet Staple
Finisher and Booklet finisher to tidy the
printout.
2. Mailbox
Sorts printed paper.
*Mailbox trays 1-9
3. Copy tray
Copies are delivered here.
4. Extension unit
Attached to the LCT and holds 2500
sheets of B4 JIS or 8
1
/
2
" × 14" sized paper.
5. Large Capacity Tray (LCT)
Holds 4000 sheets of paper.
6. Interposer
Inserts cover or slip sheets into the cop-
ies.
7.
3,000Sheet-50Sheet Staple Finisher
Sorts, stacks, staples and punches copies.
*6: Finisher upper tray
*7: Finisher shift tray
8. Booklet Finisher
The saddle stitch function can staple the
copies in the center and fold them into
booklets.
*3: Finisher upper tray
*4: Finisher shift tray
*5: Finisher booklet tray
9. Z-folding unit
Makes two parallel folds on the copied
paper, one of which faces in and the other
facing out.
10.
3,000Sheet-100Sheet Staple Finisher
Sorts, stacks, staples and punches copies.
*1: Finisher upper tray
*2: Finisher shift tray
ANP006S
To Next Page
Loading...
Need help?
General
