Copying
122
2
A Press [Edit / Stamp].
B Press [Stamp].
C Press [Stamp Text].
D Press [Change Text].
E Enter stamp text, and then press [OK].
F Press [All Pages] or [1st Page Only] to select the print page.
G Press [OK] twice.
H Place originals, and then press the {Start} key.
Note
❒ If the main power is turned off, the text is cleared. To save the typed text,
you can program them.
Reference
“Stamp”, General Settings Guide
Changing the stamp position
A Press [Change] under Stamp Position.
B Select the desired position, and then press [OK].
To Next Page
Loading...
Need help?
General
