6
❖ Reproduction Ratio
❖ Edit
Item Description
Shortcut R / E You can register up to three frequently used Reduce/Enlarge ra-
tios other than the fixed Reduce/Enlarge ratio and have them
shown on the initial display.
R / E Ratio You can specify the enlargement and reduction ratios that appear
if [Reduce / Enlarge] is pressed on the copier screen.
R / E Ratio Priority You can set the ratio with priority when [Reduce / Enlarge] is
pressed.
Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Mar-
gin in a shortcut key.
Item Description
Front Margin: Left / Right You can specify left and right margins on the front side of copies in
Margin Adjustment mode.
Back Margin: Left / Right You can specify left and right margins on the back side of copies in
Margin Adjustment mode.
Front Margin: Top / Bottom
You can specify top and bottom margins on the front side of copies
in Margin Adjustment mode.
Back Margin: Top / Bottom
You can specify top and bottom margins on the back side of copies
in Margin Adjustment mode.
1 Sided→2 Sided Auto
Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side. The margin is set to the same value of “Back Margin:
Left / Right”.
1 Sided→2 Sided Auto
Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side. The value set for “Back Margin: Top / Bottom” is
used.
Erase Border Width You can specify the width of the erased border margins with this
function.
Erase Original Shadow in
Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1"
boundary margin around all four edges of each original.
Erase Center Width You can specify the width of the erased center margins with this
function.
Front Cover Copy in
Combine
You can make a combined copy on the front cover sheet when you
select the Front Cover mode.
Copy Order in Combine You can set the copy order in Combine mode to Left to Right or
Top to Bottom.
Orientation: Booklet,
Magazine
You can select the orientation of copies to open when using Booklet
or Magazine mode.
Copy on Designating
Page in Combine
You can specify whether to make a combined copy on the inserted
slip sheets in Desig./Chapter mode.
Image Repeat Separation
Line
You can select a separation line using the Image Repeat function
from: None, Solid, Broken A, Broken B, or Crop Marks.
Double Copies Separation
Line
You can select a separation line using the Double Copies function
from: None, Solid, Broken A, Broken B, or Crop Marks.
To Next Page
Loading...
Need help?
General
