Tektronix DPO70000C/DX Series User Manual

Bus setups Opening a bus symbol table file
To use
Create a TSF file with symbols and numeric values.
Copy the file to the C:\Users\[Username]\Tektronix\TekScope\BusDecodeTables directory on the
instrument.
From the Bus Setup window, select the Config tab and select a bus to decode.
In the Display tab, select the Use Symbol File check box.
Click the Browse button to locate the file.
Behavior
The instrument searches for the numeric value in the symbol table file and displays the corresponding
symbol. If the instrument does not find the numeric value, there is no symbol and the numeric value
displays.
What do you want to do next?
See an e xample of parallel bus values displayed as symbols. (see page 592)
Learn how to find and open a symbol table file. (see page 156)
Learn about digital setups. (see page 87)
Learn about bus setups. (see page 95)
Learn more about bus configuration. (see page 148)
Opening a bus symbol table file
NOTE. Symbol tables are only available when a parallel bus is selected.
From the Bus Setup window, select the Display tab, and then select the Use Symbol File check box.
To use
1. Click the Browse button to locate the file.
2. Navigate to the file location or select a symbol table file from the dialog box.
3. Click Open.
156 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series

Tektronix DPO70000C/DX Series Specifications

General

Brand	Tektronix
Model	DPO70000C/DX Series
Category	Test Equipment
Language	English