Trigger setups Trigger on A Only (Horizontal Delay off)
3. Select the A->B Seq tab; then click A Only.
4. Click to set the Horizontal Delay Mode button to O n.
5. Use the Horiz Delay and Reference Point entry boxes to delay the acquisition relative to the A Event
trigger.
Behavior
When you select A Only with Delay Mode on, the instrument first looks for the trigger conditions
specified by the A Event. The instrument then delays the acquisition for the time specified by the Horiz
Delay cont
rol before acquiring the data.
When you click on the trigger window controls, the trigger graphic
(see page 386) shows the trigger
sequence
.
What do you want to do next?
Learn more about horizontal delay. (see page 839)
Learn m ore about other trigger types. (see page 386)
Return to the Trigger Setup control window. (see page 385)
Trigger on A Only (Horizontal D elay off)
From the Trig menu, select A - B Trigger Sequence.
Overview
Use the controls in this window to define the parameters for the A ->B Sequence trigger with Horizon
tal
Delay off.
For information o n the controls, click the buttons.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 447
To Next Page
Loading...
Need help?
General
