Tektronix DPO70000C/DX Series User Manual

Oscilloscope Reference Horizontal position and the horizontal reference point
Horizontal position and the horizontal reference point
The time value you set for horizontal position is measured from the trigger point to the horizontal reference
point. This is not the same as the time value from the trigger point to the start of the waveform record,
unless you se
t the horizontal reference to 0%. See the next figure.
What do you want to do next?
Learn about interpolation. (see page 692)
Learn a
bout using the MultiView Zoom feature.
(see page 724)
Go to a step-by-step procedure for displaying waveforms. (see page 662)
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 723

Tektronix DPO70000C/DX Series Specifications

General

Brand	Tektronix
Model	DPO70000C/DX Series
Category	Test Equipment
Language	English