Tektronix DPO70000C/DX Series User Manual

Analyzing waveforms Set up MIPI search parameters
Search for error
The Error option available in Search For Error is Error Type.
Select the Error Type from the drop-down list. Click Setup to adjust the logic threshol
ds.
Set up MIPI search parameters
After setting up a MIPI bus, go to the Analyze menu, select Search, and then select the Bus trigger type;
then open the Configure tab.
Overview
Use the controls to set up the MIPI Bus parameters.
To use
For information on the controls, click the buttons.
336 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series

Tektronix DPO70000C/DX Series Specifications

General

Brand	Tektronix
Model	DPO70000C/DX Series
Category	Test Equipment
Language	English