Utilities LAN Server Status Control Window
LAN Server Status Control Window
From the Utilities m enu, select LAN Server Status.
Overview
This control window allows you to enable the VXI-11 LAN server to accept GPIB commands.
For m ore information, see the Getting Started with OpenChoice Solutions manual that shipped with
your instrument.
To use
Click the Start button to enable the VXI LAN server to accept GPIB commands.
Click the Stop button to disable the ability of the VXI-11 LAN server to accept G PIB commands.
What do you want to do next?
Return to the Utilities Menu. (see page 933)
Learn about oscilloscope analysis and connectivity. (see page 19)
Learn about GPIB Configuration Control Window. (see page 544)
External Signals Control Window
From the Utilities menu, select External Signals, or click the Ext Ref button on the Acquisition tab of the
Horizontal/Acquisition control w indow
(see page 181).
Overview
Use the External Signals control window to select the signal to send to the Aux Out BNC connector, or
to toggle the instrument clock reference source.
NOTE. The following illustrations show C model instruments. On D model instruments the External
Reference In maximum input voltage is 4 V and the impedance is 50 Ω.
546 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
