Controls and connectors Front panel overview
Probe Calibration output
Use the Probe Calibration output to calibrate or deskew passive or active voltage probes.
Channel 1–4 inputs
You can connect up to four probes to the inputs of the instrument. Each vertical input channel has its
own vertical control settings. Each probe input channel has its own TekProbe/TekVPI interface.
D15–D0 inputs
You can connect one logic probe to the logic port on the front of the instrument. Each digital channel
has its own control settings.
Auxiliary trigger input
The trigger level range for the Auxiliary Input is adjustable.
On/Standby switch
Use this button to power on the instrument or to set the instrument to standby.
Before shutting down, it is recommended that you first exit the instrument application and any other
act
ive Windows applications to avoid error messages on shutdown or the next power up.
TIP. To exit the instrument application and shut down in one step, select Shutdown in the File menu.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 57
To Next Page
Loading...
Need help?
General
