ABB ACS880-34 User Manual

Maintenance 173
1. Remove the fastening screw.
2. Pull the memory unit out.
3. Install the new memory unit in reverse order.
Note: There is a spare screw next to the memory unit slot.
To remove the memory unit from the line-side converter control unit:
 Replacing the line-side converter control unit memory unit
1. Stop the drive and do the steps in section Precautions before electrical work on page
18 before you start the work.
2. Remove the cover on the memory unit.
3. Pull the memory unit out.
4. Install the new memory unit in reverse order.
X205
2
3

ABB ACS880-34 Specifications

General

Brand	ABB
Model	ACS880-34
Category	DC Drives
Language	English